Retail Routing Guides: How Brands and 3PLs Use Them

By George Bova November 17, 2026
Retail Routing Guides: How Brands and 3PLs Use Them

Apparel and Retail Fulfillment  /  7 min read  /  Blog

What a retailer's routing guide contains, who owns keeping it current, and a handoff checklist so the warehouse ships to the rules the retailer actually enforces.

By George Bova, Director of Sales

A retail routing guide is a retailer's instruction manual for its suppliers. It specifies how orders must be packed, labeled, palletized, shipped and scheduled, how shipment data must be sent, and what the retailer deducts when a rule is missed. The brand owns the relationship and the current version; the 3PL executes the rules in the warehouse. The handoff between them is where most routing-guide failures start.

This guide is part of the apparel fulfillment topic cluster, with practical guidance for wholesale and retail orders.

KDS warehouse team checks labeled cartons before retail shipment
The routing guide decides what these cartons look like: label, placement, case pack, pallet build and carrier.

If you arrived here looking for a specific retailer's routing guide, it lives in that retailer's vendor or supplier portal and is not reproduced on this page. This article explains what every routing guide contains and how a brand and its fulfillment partner use one day to day. It is part of the B2B fulfillment series.

The short version: a routing guide in practice

  • ► It is the retailer's rulebook. Packing, labeling, pallets, carriers, appointments, data, penalties.
  • ► The current version is the only one that counts. Guides are updated; the old version causes new deductions.
  • ► The brand owns it; the warehouse executes it. The handoff has to be deliberate.
  • ► Most of it lives in the WMS. Label formats, case packs, carrier rules and ASN timing are configured once per retailer, then enforced on every order.
  • ► Exceptions are defined in the guide too. Short ships, substitutions and late deliveries each have a required process.

What does a retail routing guide contain?

Routing guides vary in length from a few pages to a few hundred, but the sections are consistent.

SectionWhat it covers
Purchase order termsHow POs are issued and acknowledged, ship windows, cancel dates, quantity tolerances
Item setup and ticketingUPC or GTIN requirements, price ticket format and placement, floor-ready rules such as hangers, bags and security tags
Carton requirementsSize and weight limits, case pack rules, mixed carton rules, carton marking
Carton labelsGS1-128 label content, size, placement to the inch, and the serial shipping container code that links the carton to the ASN
Pallet requirementsPallet type, stacking pattern, height, wrap, corner boards, pallet label
Shipment dataWhich EDI documents are required, especially the advance ship notice, and the window in which each must be sent
Routing instructionsWhich carrier and service level to use by shipment size and destination, collect or prepaid, consolidation rules, how to request routing
AppointmentsHow and when to book delivery appointments, lead times, what to do if a carrier will miss one
ExceptionsShort ships, substitutions, backorders, damaged goods, returns to vendor
Compliance and chargebacksThe schedule of violations and the fee for each, and the dispute process

The EDI fulfillment page covers the shipment data section in depth, and the retail chargebacks article covers the compliance schedule and how to review deductions.

Who owns the routing guide, and how is it kept current?

The brand owns it. The brand has the vendor agreement, the portal login and the relationship with the retailer's compliance team. The fulfillment partner executes the rules but cannot see the portal and will not be notified when the guide changes.

That creates the central risk: a guide updated in the portal while the warehouse ships to last year's version. A workable ownership model:

  • The brand downloads the current guide at onboarding and whenever the retailer announces a change, and forwards it with the change highlighted.
  • The 3PL loads the rules into the warehouse management system, confirms receipt of each new version, and flags any rule it cannot execute.
  • Both keep a dated log of which version is in force for each retailer.
  • A review cadence, for example quarterly, in which the brand re-checks each retailer's portal for changes that were not announced.

Some fulfillment partners monitor guides for retailers they ship to for many clients. That helps but does not replace the brand's ownership, because retailer rules can be account-specific.

How are labels and carton rules turned into warehouse execution?

The routing guide's label and carton sections become configuration in the WMS. For each retailer:

  1. Label template. The GS1-128 label is built to the retailer's layout, including data content, barcode specification and human-readable fields.
  2. Placement rule. Where on the carton the label goes, and whether a second label is required.
  3. Case pack and mixed carton rules. Units per carton by item, whether mixed cartons are allowed, and how prepacks are configured.
  4. Carton limits. Maximum dimensions and weight, enforced at pack.
  5. Floor-ready rules. Ticket format and placement, hanger type, bagging, security tags.

Once configured, every order for that retailer is picked, packed and labeled to the rule without anyone consulting the document. The document is consulted again only when it changes.

Cartons loaded in a trailer for a retail shipment at a Komar Distribution Services facility
Routing instructions decide the carrier and the service level; the appointment decides when this trailer can arrive.

How do routing instructions and appointments work?

Routing instructions tell the supplier which carrier to use, often depending on shipment weight, carton count or destination. Many retailers require the supplier to request routing through a portal and ship on the retailer's own carrier account for larger shipments, with smaller shipments going prepaid by parcel. Shipping on the wrong carrier, or prepaid when collect was required, is a common deduction.

Appointments are booked with the retailer's distribution center after the ASN is sent and within a stated lead time. The carrier needs the appointment number and the PO references. If a carrier will miss an appointment, the guide specifies how and when to notify the DC and reschedule. A missed appointment without notice is among the more expensive violations.

Who books appointments depends on the arrangement: the carrier, the 3PL or the brand. The agreement should say which.

How are exceptions handled?

The guide defines the process for each exception type:

  • Short ship. Whether partial shipment is allowed, how it must be flagged on the ASN and the PO acknowledgment, and whether a backorder is accepted.
  • Substitution. Usually not permitted without written approval; the process for requesting it.
  • Damaged or defective goods. How the retailer reports them and whether return-to-vendor applies.
  • Late delivery. Notification requirements and whether the retailer will accept the goods.

The brand makes the decision on each exception; the warehouse surfaces it early enough for the decision to be made. A warehouse that discovers a short ship when the trailer is loading has left the brand no options.

The brand-to-3PL routing guide handoff checklist

Use this at onboarding and whenever a retailer is added or a guide changes.

StepOwnerDone when
Current routing guide downloaded from the retailer portal, dated and forwardedBrand3PL confirms receipt and version
Item setup confirmed with the retailer: identifiers, case packs, pricingBrand3PL has the item file loaded
Label template built and submitted for retailer approval3PLRetailer approves content and placement
Carton, pallet and floor-ready rules configured in the WMS3PLTest order packs to spec
EDI documents mapped and tested with the retailerBrand or EDI provider, with 3PLRetailer sign-off on test transactions
Routing instructions configured: carrier by shipment profile, collect or prepaid3PL, from brand inputTest shipment routes correctly
Appointment booking owner and process agreedBrand and 3PLWritten into the agreement
Exception process agreed: short ship, substitution, damage, late deliveryBrand and 3PLWritten into the agreement
Pilot order shipped and reconciled end to endBothNo deductions on the pilot, or causes fixed
Version log started and review cadence setBrandNext review date on the calendar

How Komar Distribution Services uses routing guides

KDS loads each retailer's current routing guide, item setup, label specification and carrier rules into Manhattan WMS before the first live order, confirms the version in force with the brand, and flags rules it cannot execute at the facility in question. Chargeback compliance on retail orders is measured at 99.93%. The checklist above is the one we work through at onboarding.

Key takeaways

  • ► A routing guide is the retailer's rulebook: packing, labels, pallets, carriers, appointments, data, exceptions and penalties.
  • ► The brand owns the current version; the 3PL executes it. Log which version is in force per retailer and review on a cadence.
  • ► Label, carton and floor-ready rules become WMS configuration, applied to every order without consulting the document.
  • ► Routing instructions and appointments are where carrier and timing deductions come from. Agree who books.
  • ► Surface exceptions early so the brand can decide.
  • ► Run the handoff checklist at onboarding and on every change.

Frequently asked questions

What is a routing guide in retail?

A routing guide is a retailer's set of instructions to its suppliers covering how purchase orders must be packed, labeled, palletized, shipped and scheduled, which shipment data must be sent and when, how exceptions are handled, and what the retailer deducts when a rule is missed. Each retailer publishes its own in its supplier portal.

Where do I find a retailer's routing guide?

Start with the retailer's official vendor or supplier portal or its onboarding team. Some routing guides are public; others require a vendor login. Use the current official version and confirm its effective date before preparing a shipment.

Who is responsible for routing guide compliance, the brand or the 3PL?

The brand owns the vendor relationship and the current version of the guide. The fulfillment partner executes the packing, labeling, pallet, data and carrier rules in the warehouse. Responsibilities for appointments, exceptions and disputes should be written into the fulfillment agreement.

How often do routing guides change?

Retailers update guides periodically, sometimes annually and sometimes mid-season, and not every change is announced. Brands should re-check each retailer's portal on a set cadence and forward changes to the warehouse with the differences highlighted.

What happens if a shipment does not follow the routing guide?

The retailer deducts a chargeback from the supplier's invoice according to its compliance schedule, and in some cases refuses the shipment. Common violations are label errors, wrong case packs, late or inaccurate advance ship notices, wrong carrier and missed appointments.

Sources and further reading

Get the routing-guide handoff checklist

Or bring us your retailers and we will walk through it with you.

Tell us which retailers you ship to and where compliance is costing you. We will walk through the handoff checklist for each retailer, confirm which rules we can execute at the facility that fits and show how they are configured in the WMS.

Request the checklist ›

sales@komardistribution.com  |  (918) 429-7779  |  komardistribution.com

For the broader receiving, storage, shipping and returns process, read our apparel fulfillment guide for clothing brands.

Share this post